What this tee is made of, and why that shapes care
The Handcrafted at High Altitude Tee is made from 100% cotton in a rustic clay color. That single fact drives most of the decisions below: cotton is comfortable and breathable, but it responds to heat and agitation, and the tee carries a printed design on both the front and the back. The front shows the Stranahan's mantra, and the back reveals the brand's iconic location and elevation.
Because the print appears on two sides, your washing routine needs to protect both surfaces, not just the one you see in the mirror. The product record does not include a separate care label or washing instructions, so this guide sticks to general cotton and printed-tee practices and flags where you should check the label on the garment you receive.
Fit: what the available sizes tell you
The tee is offered in Small, Medium, XL, XXL, and XXXL. Note that Medium is the only size between Small and XL in the supplied variant list; if you normally wear a Large, confirm sizing before ordering rather than assuming a middle option exists.
- Choose your usual size first: The supplied record lists sizes but no chest, length, or sleeve measurements. Without those numbers, the safest starting point is the size you normally wear in a cotton graphic tee, then adjust only if you want a noticeably looser or closer fit.
- Size up for a relaxed, layer-friendly fit: If you plan to wear the tee over a long-sleeve shirt or want an easy, roomy drape, a larger size gives you more room through the body. The tradeoff is a longer, looser hem that may sit lower than you expect.
- Size down only if you want a closer fit: A closer fit can look sharp on its own, but it leaves less room for layering and may pull across the chest. Because the fabric is 100% cotton, there is no stretch component listed to compensate.
- Check the return or exchange policy before removing tags: The product record does not state a fit guarantee. If you are between sizes, try the tee on before washing so you keep your options open.
Product facts that affect fit and care
- Handcrafted at High Altitude Tee: Made from 100% cotton in a rustic clay color. Cotton is the base material for every care decision here; it shapes how the tee feels, how it layers, and how it responds to washing.

Handcrafted at High Altitude Tee - Handcrafted at High Altitude Tee: The front displays the Stranahan's mantra, and the back reveals the brand's iconic location and elevation. Two printed surfaces mean you need to protect both sides during washing and drying, not just the front graphic.
- Handcrafted at High Altitude Tee: Available sizes: Small, Medium, XL, XXL, and XXXL. There is no Large listed in the supplied variants, so check the size chart or contact the store if you normally wear a Large.
How to wash a two-sided graphic tee
The product record does not include a care label, so the steps below are general best practices for 100% cotton printed tees. Always check the label inside the tee you receive and follow it if it differs.
- Turn the tee inside out: This puts the printed front and back against each other rather than against the drum or other garments, reducing abrasion on both designs.
- Wash cold on a gentle cycle: Cold water and low agitation are gentler on cotton and on prints. Avoid hot water, which can encourage shrinkage and fade.
- Use a mild detergent and skip bleach: Bleach can dull the rustic clay color and degrade the print. A small amount of mild detergent is enough for a cotton tee.
- Wash with similar colors: The clay color can release dye in the first few washes. Keep it away from whites and light colors to avoid transfer.
- Skip the dryer or use low heat: High heat is the main risk to both cotton size and print longevity. Air-drying flat or hanging the tee is the safest option; if you must tumble dry, use the lowest setting and remove the tee while slightly damp.
- Cool iron inside out if needed: If the tee wrinkles, iron on the reverse side and avoid pressing directly on the print. Do not iron over the graphic.
Layering and everyday wear
The 100% cotton build makes this a comfortable standalone tee in warm weather and a useful base layer when temperatures drop. Because the print appears on both sides, it works as an outer layer over a plain long-sleeve shirt or under an open flannel or jacket. If you layer it under a sweater, the back print will be hidden, so treat that as a practical way to wear the tee without exposing the design to extra friction.
For a mountain t-shirt fit that feels intentional, decide whether you want the tee to sit close to the body or drape loosely. A closer fit looks cleaner under a jacket; a looser fit suits casual weekend wear. Either way, try the tee on with the layers you plan to wear before washing it.
What to confirm before you buy or wash again
The supplied product record covers fabric, color, print placement, and sizes, but it does not include a care label, measurements, or shrinkage information. Use these checkpoints to fill the gaps responsibly.
- Check the inside label when the tee arrives: The label is the authoritative source for washing temperature, drying, and ironing. If it conflicts with this guide, follow the label.
- Measure a tee you already like: Compare chest width and body length against the store's size chart if one is available. The supplied record does not list garment measurements, so a known-good tee is your best reference.
- Expect some cotton character over time: Cotton can shrink slightly with heat and wear in with washing. Cold water and air-drying reduce that risk, but no cotton tee stays exactly the same forever.
- Treat the print as the delicate part: The front and back designs are the features most likely to show wear first. Inside-out washing, cold water, and low heat are the simplest ways to keep them looking sharp.


